RSS - Complete Site

Amish Sex

Thu, 09 Sep 2010 23:41:39 +0000

Amish Sex

An Amish woman and her
daughter were riding in an old buggy one cold
blustery day.
The daughter said to her mother,
'My hands are
freezing cold.'
The mother replied,
'Put them between
your legs and your body heat will warm them up.'
The daughter did, and her hands warmed up.
The next day the daughter was riding with her boyfriend
who said,
'My hands are freezing cold.'
The girl replied,
'Put them between my legs and the warmth of my body will warm them up..
He did and warmed his hands.
The following day the boyfriend was again in the buggy with the daughter.
He said,
'My nose is cold ..'
The girl replied
'Put it between my legs, the warmth of my body will warm it up.'
He did and warmed his nose.
The day after the boyfriend was again driving with the
daughter, and he said,
'My penis is frozen solid.'
The next day, the daughter was driving in the buggy with her
mother again, and she asks,
'Have you ever heard of a penis?'
Concerned the mother said,
'Why yes.....why do you ask?'
The daughter replies,
'They make one hell of a mess when they defrost, don't they!!!

[SYD] arc airbox / ganador mirrors / whiteline arms / s13 cats

Thu, 09 Sep 2010 23:39:19 +0000

1. arc super induction airbox s13 $350

2. ganador mirrors s13 $350

3. whiteline upper control arms $250 (RRP $350)

4. whiteline upper radius arms $150 (RRP $260)

5. cat converter s13 2" and 2.5" $50 each

located in sydney. pm if interested

Power Differences Between Shootout Modes

Thu, 09 Sep 2010 23:36:03 +0000

Thought this may be of interest even though it was an XR6 Turbo Falcon used as the test vehicle. Also note what happens on the run when the intake temp (IT) is much higher than the AT (7th dyno run).

http://www.fordxr6turbo.com/forum/index.php?showtopic=59178

Edit:

Summary:

Note the F designation is for forced induction.

Shoot4 317.7rwks

Shoot4F 314.8rwks

Shoot6 317.9rwks

Shoot6F 323.4rwks

Shoot8 326.1rwks

Shoot8F 329.8rwks

Normal ramp mode (not shootout) 315rwks

Shoot6F AT15 IT59 349.8rwks.....so 26rwks increase when intake temp is significantly higher than atmospheric temp

FS: 2001 Yamaha R1

Thu, 09 Sep 2010 23:27:09 +0000

Selling my Bike.... Female owner and rider. Bike is in awesome condition well taken care of and serviced regularly. Bike has done approx 40,000k's and is always garaged. Bike has aftermarket Japanese full exhaust system. Rear Smoked LED tail lights and flush indicators which are not yet installed but will include with bike. Selling for $6500 ono. Includes RWC and 12 months Rego. $6000 without Reg.

Part Shop Max Arms

Thu, 09 Sep 2010 23:24:51 +0000

Sup NS peeps.

Like a few people in the low club my old toe arms have a slight bend in them from hitting the subframe...

Anyways there are a couple of ways to fix it up...

you can raise te subframe (going to do that as well but i dont have time before the next drift day) \

or Bent arms.

I was holding out for some of Cazmans arms but they still dont seem to be developed so i gave the part shop max arms a run.

Initail impressions are good, the plating is high quality the fittings very well machined and the general feel and constuction is top notch.

Just though id put some pics up of the arms,

ill be installing them tomorrow so ill take some shots and let you know how they go in terms of fitting.

Has anyone else got a aset yet that they have tried?

or am i the test dummy here lol

For the record they were $306.96 delivered to my door

of whitch approx $80 dollars was in postage 0_o so if you can fine a mate in USA to buy them and post them you can probably get them for significantly cheaper

that said comapred to say Cusco arms from japan brand new they are still quite price compeditive (damm you cars)

phone size comparo

THe arms came with two sets of rose joint tapers. in slightly different sizes not sure why can anyone shed some light>

Oh and they came with stickers whitch is always good

-Biggie

Defi style gauges from only $80 each!?!?

Thu, 09 Sep 2010 23:17:22 +0000

These gauges are defi style and come with there own stands as pictured below.

Boost gauge $80

Water temp gauge $80

Oil temp guage $80

Oil pressure $90

ISC 52mm alloy aftermarket radiators

Thu, 09 Sep 2010 23:16:00 +0000

These aftermarket ISC 52mm dual core radiators are fantastic value for money! They are a direct bolt on replacement for your standard unit and will help to keep your engine temperature at an all time low when driving your vehicle hard whether it be on the street or on the track.

RB20DET = $329
SR20DET S13 = $329
RB25DET = $329
RB26DETT = $329
EVO 7 = $329....NOW $249!

ISC N1 coilovers "SUPER SALE" $1199 per set! Limited time only (normally $1499)

Thu, 09 Sep 2010 23:14:34 +0000

-$1499 PER SET ISC N1 **$1199 (limited time only)

-$750 PER PAIR

-$50 PER EXTRA SPRING

-12 MONTHS WARRANTY

-CHOOSE YOUR OWN SPRING RATE AT NO EXTRA COST

-32 STEP DAMPER ADJUST

-HEIGHT ADJUST

-BOUND ADJUST

-CAMBER TOPS

-EXTRA CAMBER ADJUST VIA BOTTOM BRACKET

-NON GENERIC

-AS USED BY AUSTRALIA'S TOP DRIFTERS

RYAN PROBERT-0413804117

VISIT OUR WEBSITE FOR MORE INFORMATION.......ISC WEBSITE

ISC coilovers were first distributed in Australia in early 2006. The coilovers have been sold through out Asia, America and Europe for over 10 years with a very positive response.
Our coilovers are produced at our own workshop by qualified technicians, designers and quality control personnel. Some of the designing is now carried out by our very own team in Australia making the coilovers more suitable for the Australian market.
In 2006 our company supported Danny Vahoumis "the godfather of drift" through sponsorship. Danny proved the durability of our products at the top level of Drift in Australia, collecting podium finishes along the way.
In 2007 ISC supported the Wheelworx 3 car DA team consisting of Tom Monkhouse, Adam May and Linden Reynolds. Once again this demonstrated that our coilovers can perform at the highest level of motorsport, this was evident when Tom Monkhouse finished first at RD3 in Eastern Creek.
Over time our products have become more popular, thus constantly updating our performance range in order to bring you the best quality products at an affordable price.

ISC Australia has just released new thrust bearing kits for its range of N1 coilovers.

These kits are manufactured in Australia, using high quality Japanese bearings.

The addition of the bearing kit to your coilovers will add faster and smoother steering response, and allows better spring compression. Another huge bonus is that it takes a lot of stress away from the pillowball giving it a longer life.

Kits are available for purchase with N1 coilovers for an additional $100 (below cost price) or can be purchased seperately for $149 a pair.

Steering Wheel

Thu, 09 Sep 2010 23:09:21 +0000

Need a GOOD condition stock steering wheel for RWC. Must not have separation between outer material and steel core.

Steering Wheel

Thu, 09 Sep 2010 23:08:14 +0000

Need a GOOD condition stock steering wheel for RWC. Must not have separation between outer material and steel core. On Gold Coast.

problem viewing classifieds

Thu, 09 Sep 2010 23:07:43 +0000

yeah so preety much i wanna put one of my cars up for sale and it wont let me completely fill out the form, wont let me scroll down to the bottom of the page, and when looking at other items it does the same, il printscreen in a sec

CA18DET PARTOUT

Thu, 09 Sep 2010 22:59:30 +0000

Location: QLD: Gold Coast
Contact Info: PM, Post or SMS 0419 763 226

hey all,

just bought myself a new shell to play with, which has a blown CA18DET in it.

the engine died from the waterpump seizing, and overheating the motor.
therefore the waterpump will not be for sale, haha.

--The head will need a machining. head is available complete for $100. this includes cams, gears, rocker covers, timing casing, the lot.

--The block itself is fine, would be good for anyone to use as a replacement who's CA18 has decided to spit bearings.
block is available complete with crank girdle, crank, pistons and rods for $200. no sump.

--Sump $50.

--Alternator $50.

--Power Steering Pump $50.

--Starter Motor $50.

--Radiator $50. includes hoses and shroud.

--Inlet Plenum $50. complete. which includes injectors, fuel rail, throttle body, TPS.

--T25 Turbo $100. comes with CA18DET factory manifold and factory dump pipe. --SOLD.

--CA18DET/SR20DET gearbox - $350 as a CA18 box, $450 if u want it converted to SR20 box.
is in very good condition. no synchro dramas or selection issues. will come with sensors.

--Tailshaft, will suit NON-ABS S13s with SR20DE, SR20DET, CA18DE and CA18DET. good center bearing. $150.

--CA18DET EXEDY Clutch, 5 puck brass button, i have two full clutches. $200 each. ~80% life left.

--Mint condition Engine loom - $100.

--Auto/Manual ECU - $50.

this is just a small amount of stuff. the whole engine is still here. will separate smaller items from certain assemblies for the right price.
i am slightly negotiable on certain items. no lowballing please.

pics can be sent to you're phone, just sms me on 0419 763 226 and ill reply with pics.

items will be located in Pimpama on the Gold Coast, or Milton in Brisbane at certain times monday to friday.
postage is no trouble for any items. can freight the block etc if desired.

cheers

Will.

180SX TYPE X SPOILER!1

Thu, 09 Sep 2010 22:57:23 +0000

NEED TYPE X SPOILER.

!!!!PM !!!

Meister 17x9 +14 4H MEGA RARE- Heaps of 17-18" Work Volk , Nismo, SSR wheels +S13 S14 S15 180sx OEM and aftermarket parts- ALL JAP BRANDS no cheapy :)

Thu, 09 Sep 2010 22:40:01 +0000

Hey guys,

SILVIA and 180sx PARTS GALORE click here

We have the following Wheels and Seats on offer.

SSR SP1 Stickers
$150

Work Meister Stickers-ALL BLUE
$120

Volk GTC Nuts - Internal Drive (20)For 1.25 & 1.5 $280

Kyo-Ei R40 REVO Wheel Nuts
1.35 and 1.5 in stock
Brand new
$330

Kyo-Ei R40 REVO Wheel Nuts
1.35 and 1.5 in stock
Brand new
$300

Kics Titanium Coating Nuts 1.25 and 1.5O WITH KEY Made in Japan $200

Kyeoi Project Kics Wheel Nuts 1.25 and 1.5 WITH SPECIAL LUG NUTS/KEY Made in Japan $270

Nismo 60mm Studs (20x1.25)
$230

5 Zigen nuts (20x 1.25) $200

Work Meister S1 rare 4H
114.3x4
17x9 +14
Excellent condition
215/45 ~70% Firestones
$2300

SSR SP1
114.3x5
17x10 +11
$1250 (ETA SEPT)

Volk TE37-BLACK
17x9 +15
18x9.5 +22
215/40 Goodyear RS02 225/40 ~60% Nitto NT555
$3300 (ETA SEPT)

Work Meister S1 3P
114.3x5
18x10.5 +12
$1400 PAIR(ETA SEPT)

SSR SP1 Black-Pair
114.3x5
18x9 +19
no tyres
$1200 PAIR(ETA SEPT)

Volk TE37 Bronze
114.3x5
17x9 +22
255/40 GIII ~60%
$2700 (ETA SEPT)

SSR SP1 Chrome
17x8 +29
17x9 +31
$1900 (ETA SEPT)

SSR SP1 Professor
114.3x5
17x9 +19
17x9.5 +30
$2,000 (ETA SEPT)

Work Meister S1
114.3x5
17x8 +13
17x9 +15
$2200 (ETA SEPT)

SSR SP1 Professor
114.3x5
17x9 +16 (72mm dish)
17x10 +37 (72mm dish)
$2200 (ETA SEPT)

Volk GT-C Custom Red
114.3x5
18x8 +36
18x9 +30
$2300 (ETA SEPT)

SSR SP1
17x8.5 +10
17x9 + 16
(slight buckle at back of rim)
$2200

Work S1 1P Silver
114.3x5
17x8 +37 (Clear big brakes)
$1100

Work Meister S1
18x8 +30
18x8.5 +24
tyres bald-Paint flaking
Selling cheap $1700

SSR Agle Minarva
18x9 +31
18x10 +24
245/40 Dunlop ~75%
$1800

Nismo LM GT4
18x8.5 +30
18x9.5 +38
235/40 ~50% Federal SS595
$2600

Work Meister S1 Chrome-PAIR
114.3x5
18x9 +33
$1,000

Volk GT-N
18x9 +24
18x10 +30
245/40 275/40 ~60%
$2500

Volk Racing GT-7 Mercury Silver Excellent condition 17x9 +21 (75mm Dish)
114.3x5 235/45 AD07 90% treads
$2800

BNR34 Wheels
18x9 +30
Pilot Sport 245/40 bald
$1900

Work Meister S1-Gold
18x8.5 +27
18x9.5 +30
225/40 245/40
$2500

SSR Sp1 Professor
114.3x5
18x8.5 +35
$1000

Work VS KF Shadow Chrome
18x8 +21
18x9 +33
235/45 ~70% rear tyres bald
$1900

Volk CE28N - Near New condition
114.3x5
17x7.5 +43
17x8.5 +30
Brand new Nexen 225/45 255/40
$2550

Work Meister S1 2P
100x5
17x8 +30
215/45 Yokohama & Falken ~65%
$1800

Volk RE30-Excellent Condition- super light weight and in near new condition so are the tyres
114.3x5 18x8.5 +25 18x9.5 +35 Advan S Drive 245/40, 275/40 ~90% $3500

SSR SP1 Professor-PAIR
18x9.5 +30
255/40 ~50%
$1300

Volk Racing GT-AV
18x9 +16
18x10 +24
Dunlop 225/40 ~90% tread Yokohama S Drive 275/40 ~70%
$3000

Volk Racing Challenge
18x8 +35 114.3x5
18x9 +32 114.3x5
235/40 ~50% 265/35 ~80% GIII
$1900

Work Meister S1 2P 18x8 +35 18x9 +35 tyres ~60% $1800

Volk 57F Pro Noble Gold 18x8 +24 18x9 +24 225/40 GIII ~75% Suit S15 perfectly $2300

Work Meister S1 3P 4 Stud - BRAND NEW
114.3x4
18x9 +22 (83mm dish)
18x10 +22 (96mm dish)
$3600

Work CR Kai MHG Bronze BRAND NEW 114.3x5 18x8.5 +32 18x9.5 +12 $2200

Work Meister S2R
Good for ripping them apart- suit big brakes
$1100

Work Meister S1 2P
Brand new PAIR
18x9 +35
245/45 ~70% Potenza
$1300 PAIR

SSR SP1 Professor
17x8.5 +37
17x9.5 +43
1 Rear wheel has 2 small buckles
$1500 SOLD AS IS

Work Seeker CS
18x9.5 +15
18x10 +15
Potenza 245/40 265/35 ~70%
$2200

BRIDE AND RECARO SEATS

BNR32 Seats
Excellent condition
$550

Recaro Bucket Seat
$200 SOLD AS IS

Recaro SR4
very good condition
$1400

S15 Seats with rails
excellent condition
$500 (ETA SEPT)

Black Recaro SR3- excellent condition
$1300 Pair (with rails $1550 pickup)

RED Recaro SR3 with rails $1500 pair

WE HAVE HEAPS OF RAILS TO SUIT BRIDE AND RECARO FOR SILVIAS AND SKYLINES

Bride Ergo/Brix Rails for R32/R33 $180 RHS $200 LHS
RHS and LHS in stock

Recaro SR3 Rails for R32/R33/R34 and Silvia- $180 RHS $200 LHS

Genuine Bride Brix II/Ergo II RX Rail for S13-S15 R32-R33
$330 each
RHS and LHS in stock

Brand New FG Type $330
RHS and LHS in stock

Bride Vios II with CF backing
$950 (with rail $1100)
We have rails to suit Skyline/Silvia/Supra

Bride Monster Holding with CF backing
$950 (with rail $1100)
We have rails to suit Skyline/Silvia/Supra

Bride 1.5 Brix-Excellent condition
$700 each (rail extra)

Please Contact us on 0422 422 344, or PM us if you have any further questions.

Cheers,
Thuy

> Complete Suspension Packages At Discounted Prices!

Thu, 09 Sep 2010 22:36:59 +0000

We are now offering complete suspension package deals.

With adjustable suspension packages you can fine tune the characteristics of your vehicle.

Here is a quick run down of what each part does:

Castor Rods: Eliminate movement in factory bushes. Increases predictability, accuracy in handling and braking.
Rear Camber Arms: Adjust rear camber to increase traction on lowered cars. Can also help get wide wheels inside guards.
Rear Toe Rods: Adjust toe to increase sideways grip, tyre wear and removes factory bushes
Rear Traction Arms: Removes factory bushes and allows adjustability to create closer to factory geometry in lowered cars
Aluminium Cradle Bushes: Removes movement from rear sub frame. Fixes ageing bushes
Steering Lock Spacers: Add approximately 15 degrees of lock

S13 Package 1: Non HICAS
KKR Castor Rods
KKR Rear Camber Arms Type 1
KKR Rear Toe Rods Type 1
KKR Rear Traction Arms
Aluminum Cradle Bushes
Extra Lock Spacers
$699 - SAVE $119!!

S13 Package 2: HICAS
KKR HICAS Lock Bar Type 1
KKR Castor Rods
KKR Rear Camber Arms Type 1
KKR Rear Toe Rods Type 1
KKR Rear Traction Arms
Aluminum Cradle Bushes
Extra Lock Spacers
$849 - SAVE $129!!

R32 Package 1: Non HICAS
Front Camber Arms
KKR Castor Rods
KKR Rear Camber Arms Type 1
KKR Rear Toe Rods Type 1
KKR Rear Traction Arms
Aluminum Cradle Bushes
Extra Lock Spacers
$899 - SAVE $168!!

R32 Package 2: HICAS
KKR HICAS Lock Bar type 1
Front Camber Arms
KKR Castor Rods
KKR Rear Camber Arms Type 1
KKR Rear Toe Rods Type 1
KKR Rear Traction Arms
Aluminum Cradle Bushes
Extra Lock Spacers
$1049 - SAVE $178!!

C33 Package 1: Non HICAS
KKR Castor Rods
KKR Rear Camber Arms Type 1
KKR Rear Traction Arms
Aluminum Cradle Bushes
Extra Lock Spacers
$549 - SAVE $100!!

We also sell these items separately without the discounted package price CLICK HERE

dc snowboard boots size 10

Thu, 09 Sep 2010 21:55:06 +0000

i am after $90 as i paid a lot more.
they have been used handfull of times,
genuine dc boots, has logo, stamps, etc etc.
cost me over $300 for these boots.
selling due to they are too small for me now.
will get pictures of soon.
located in westside victoria.
pickup is good, can deliver anywhere in aus also.

s13 door, rear bar

Thu, 09 Sep 2010 20:59:17 +0000

got s13 LHF door 100% complete mint cond $150 neg ono
got s13 silvia rear bar mint cond $50

pics upon request as im on my phone at moment

ROLL CAGE for 180 SX

Thu, 09 Sep 2010 20:38:11 +0000

KTS, almost new and I believe its 7 point roll cage for 180 SX with some padding's , almost new condition , coming with all tensile bolts and all plates , ready to be install in .Cage is still in the car so you can see how is going in and have idea how to install by self into your car.

Brisbane south
Dont need it anymore $ 800 .
Drop me PM or in post

My Number 2

Thu, 09 Sep 2010 20:24:14 +0000

Hello guys and gals I thought Id post up my bike on here.

Up until last June, I always get frustrated whenever I see a rider riding passed me when the weather is beautiful. For a year and a half I procastinated getting myself a bike and I guess I had enough. So last June, I decided to buy a bike. I bought myself a 2003 Kawasaki ZX6R 636.

She's black and gold in colour. Mods so far includes:

Yoshimura TRS slip on
HEL Braided brake lines
Rear Seat Cowl
Hyperpro Steering Damper
PCIII with custom mapping
K&N Air Filter
Frame Slider
Swing Arm Spool
Aftermarket Carbon Style Levers
Aftermarket Front and Rear Indicators
Tinted Screen
Radiator Protector
Michelin Pilot Power

And now for the pics.

Where to buy drifteks

Thu, 09 Sep 2010 15:54:47 +0000

ok guys ive used the search button and didnt come up with anything or the searches i was doing was pretty shit. bottom line is where can i buy drifteks in Sydney NSW at a good price with or without tyres doesnt really phase me! ive googled it and everything and still cant find anything on where i can actually purchase it.. trying to save couple bux from shipping plus buying them from the supplier hopefully also enables me to trial fit them before i purchase seeing which width and offset id like! please keep thread clean i am a newbie!

regards ray

Hey All

Thu, 09 Sep 2010 15:45:44 +0000

Hey all,

I'm new to the forum! I'm a Mechanic. Have a few cars between the fiance and me. I will make a list here and then will post them up in seperate threads in the my ride section.

First off:

Nickname (Me) : Nackerz
Nickname (Fiance) : Cece

Cars we own:

1988 Mx6 Manual Turbo Coupe
VL Walkinshaw Replica fitted with an RB20DET Silver top
Factory 5 Litre VL Calais Mock up
VN Calais 5 Litre
R32 GTS-t 2 door type-M Coupe

The Mx6 I have swapped for a worked 5 litre VK (My mates old one) Just got to do the swap.

Thats about it. If you wanna know more about me just ask.

Cheers

Nackerz

rb30 pacemaker extractors

Thu, 09 Sep 2010 15:41:18 +0000

having a mass clean out and ive got a set of pace maker rb30 extractors dipped in the blue shit or what eva the coating is. just need it gone so 30 bux. im in townsville

Cordless Phone

Thu, 09 Sep 2010 15:02:38 +0000

Hey guys need a new home phone. Need some recommendations. Generally need the following features
-2-3 handsets
-answering machine
-backlit screen and also number pad
-nothing over $150-$180

Was thinking of getting this http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=200510314798&ssPageName=STRK:MEWAX:IT but never had a telstra phone. Ive always had Panasonic, but really anything should work fine like the Telstra unit right? I mean its a cordless phone how hard can it be.

Cheers

-Dave-

Work Equips 18x9 18x10 EXCELLENT CONDITION

Thu, 09 Sep 2010 14:47:49 +0000

8 inch Work Equips 18X9 front and 18X10 rear no tyres
Located in Geelong.

Offset not 100% sure did a quick measure and fronts are around +30/35
Rears are around +25/30

Cheap as f**k no low ballers priced to clear.

$900

pod filter on turbo diesel ?

Thu, 09 Sep 2010 14:06:22 +0000

just wondering if installing a pod filter is a bad idea for turbo diesel , just wanna get rid of the stupid looking box filter and i have heard of poeple getting a slight increase in power and fuel economy .

anyone thats done it ur input would be great .

also i have read that the old pajero's have problems with the actuators , the springs apparently loosen up and the turbo runs less boost than it should
any one have any idea what boost a 1991 2.5 td pajero should be running ?

cheers guys new to the world of turbo diesel .

RPS13

Thu, 09 Sep 2010 14:04:32 +0000

Hi, i purchased my first 180sx 2 years ago but someone decided to drive into it the first week of ownership.

Then about a month later i bought this. I bought direct from importer, car was a simple standard 180sx upon purchase. Spent some money on cosmetics and audio but havn't done anything to the motor.

If anyone is intrested the car is for sale as i need something a little more family orientated:

http://www.carsales.com.au/all-cars/private/details.aspx?R=8860045&__sid=12AF24B4771B&__Qpb=true&Cr=13&__Ns=pCar_RankSort_Int32|1||pCar_PriceSort_Decimal|1||pCar_Make_String|0||pCar_Model_String|0&keywords=&__N=1216%201246%201247%201252%201282%204294963846%204294961243%20463%20408%20898&PriceFrom=463&PriceTo=408&seot=1&tsrc=allcarhome&__Nne=15&trecs=18&silo=1011

NISSAN 180SX SR20DET RED TOP,

5 SPEED MANUAL.

STOCK STANDARD ENGINE.

Rego: May 2011.

Serviced every 5000KM with Motul Turbolite Oil and Drift Oil Filter.

Platnium Plugs.

Car has no oil leaks, doesn't burn oil.

The car has genuine KM's all highway driving. (Travelling 500+KM/Weekly to work).

Always warmed up.

Still retains factory air-box.

Also have standard exhaust and BOV. (Not on car)

Alarm and immobolizer.

Standard T25G Turbo running 10 PSI.

3" Turbo Back Exhaust.

Return-Flow FMIC. (Not defectable as pipes go back through factory hole.)

18" Dished Starcorp Wheels. (Front 8.5" Rears 9.5" Wide)

Front Tyres Falken 80%. Rears Khumo 95%.

G4 Front/Rear Coilovers bought 5 months ago.

Type X Rear Tail Lights with Carbon Fibre "RPS-13" Over-lay.

C-west Genuine Rear Bar and Side Skirts.

Genuine G-P Sports Front Bar. (Will also provide spare)

15% Tinted Windows.

HKS SSQV BOV.

Adjustable Camber Arms.

Adjustable Toe Arms.

Front and Rear Strut Braces.

S15 5 Stud and 4 Pot Brake Conversion.

S15 Drivers/Passenger Seat.

Blue LED Cluster Lights.

MOMO Steering Wheel.

Razo Gear Knob/Peddles.

Pivot Lazy Eye Controller.

Greddy Turbo Timer

Autometer Boost Gauge.

Clarion Double Din DVD Player.

JBL Monoblock Amp.

JBL Front 6.5" Speakers.

Sound-Stream Rear 6x9's.

2 12" Sony Xplod Subs in Dual Sony Box.

Has the factory Sunroof. (No Leaks)

Xenon 6500k HID Head-Lights.

Spoiler has been removed.

Air-con re-gassed 2 months ago.

180SX Headlight shroud, Sunroof latch

Thu, 09 Sep 2010 14:01:30 +0000

Hello people of SA,

does anyone has these bits lying around?

180SX Headlight shourds, the plastic bit that goes around the headlights. Mine are cracked and broken.

Sunroof latch, the bit you use to open and close the sunroof. Mine is broken and is hanging off one arm.

Thanks people.

Wanted Power FC Hand Controller

Thu, 09 Sep 2010 13:51:34 +0000

Im after an older PFC hand controller with FCC NT 9805 - 0048 on the back of it.

I have an FCC3 version (FCC3 020 - 06387) if swapping is an option.

Cheers,
Ryan

Rear brake caliper

Thu, 09 Sep 2010 13:36:36 +0000

Just posting a question up cause im a little unsure of something when i was changing the rear brake pads on my s13 today.

Basically i followed the guide of NICO.com, but i used needle nosed pliers first up which were hopeless. I then used some multigrips which worked okay, until i accidently tore the rubber boot covering the caliper on one side. So i decided id buy the caliper tool that attaches the socket wrench. When i came back from supercheap auto i noticed a little bit of brake fluid leaking out from the rubber boot.

So i put everything back together and got my dad to start to pump the brakes to get the pressure back in, i checked the BMC and did not see the brake level drop. I checked the brakes and did not see any brake fluid dripping down. I even drop up and down my street and did not see a drop in the BMC either.

Question is how safe would it be to drive? Cause the last thing i need is for my BMC to have no brake fluid then im f*cked also the brake pedal wasnt spongy or sunk to the floor, so im hoping that a good sign....

Cheers Collin

sr20det

Thu, 09 Sep 2010 13:29:06 +0000

Ok, I havent fully decided, but let me know if you have one

no turbo needed
not blown haha

Thanks!

180SX front bar

Thu, 09 Sep 2010 13:28:47 +0000

Looking for a 180SX SR or a CA front bar in champagne colour.

Doesn't have to be mint but not wanting something that's really smashed up.

PM me what you got. Cheers!

s13 bonnet

Thu, 09 Sep 2010 13:14:54 +0000

hey guys,

mate is after a bonnet for s13. any colour, props for black though.

throw me offers, local, interstate, sponsors, anyone!

old school rally impreza

Thu, 09 Sep 2010 13:05:36 +0000

real short clip but cool as hell! gotta love diehard/crazy rally fans getting so close to stuff like this

WTB - - 180sx or s13 full lock set

Thu, 09 Sep 2010 12:59:07 +0000

Hey guys,

im looking for a full lock set for an s13 or 180sx.
need matching doors, ignition, boot locks.
and glove box if you have it

Cheers
Ben

[WTB] Canon 450D / 500D / 550D

Thu, 09 Sep 2010 12:56:28 +0000

Hi guys,
I'm looking to buy either of the three cameras in the title.
Can be body only or come with a lense or two. The maximum I have to spend is around $800, which from the bit of research I've done it seems like I should be able to get something alright for that.

I know a couple of people on here work for camera stores, so if either yourself or anyone you know has something that might suit me for sale then let me know

Happy to pay for postage for the right camera.

Thanks.

Making s13.5 guards

Thu, 09 Sep 2010 12:37:15 +0000

Hi All,

Have had a bit of a search with no luck. I need some advice/photos on welding up s13 and s15 guards to obviously make s13.5 guards.

I've nutted it out in my head a number of times about where to cut but i remember years ago i found a photo of the guards in their bare form showing the weld lines.

Anyway, if u can shed some light id appreciate it.

Thanks

GZ20 Soarer

Thu, 09 Sep 2010 12:36:51 +0000

call or txt john 0458102721

1987 Toyota GZ20 Soarer Factory 5 speed manual
Rougly about 110,000km on the clock
Roughly 11 months rego
Fully Engineered

Engine Modifications & Driveline
1G-GTE: Front Mount Intercooler
HKS Super Sequential BOV
Pod Air Filter with Custom Cold Air Box
JustJap Oil Catch Can
3 Inch Trbo Back Exhaust to Twin Straight Pipes
Greddy Profec B-spec II tuned now to about 14.5psi
Brand new Excedy heavy duty clutch (probably 2500km on it, not even)

Suspension and Brakes:
HSD HR Coilovers FRONT AND REAR
Whiteline Adjustable REAR swaybar
Cusco Strut Braces FRONT AND REAR
JIC upper control arms (ultra rare)
Cusco Brake master cylinder stopper
Power Steering cooler
EBC Green Stuff Pads upfront
Stock rotors recently machined

Exterior:
Stock bodykit
Fog light Front bar
Kakimoto 17x9+22 wheels
Rolled Guards
HID Headlights 6000k
LED Parkers

Interior:
Blitz Turbo Timer
Recaro SR2 Drivers seat
TRD shift knob
JustJap Dished steering wheel
Sony CD player with ipod cable connection
Kenwood Front Speakers
Saber Gauges Oil temp, Water temp and Oil pressure

car just got serviced, gearbox oil change and master cylinder rebuild last week costing $500 in jap spec garage.
car goes and looks well,sounds great..located in ACT..
looking $8550ono
call or txt john 0458102721

s14a seats s13/180sx cluste

Thu, 09 Sep 2010 12:17:33 +0000

hi i got a pair of s14a seats in perfect cond no rips wear or tears always ran slip on seat covers direct bolt in for 180sx or s13 good upgrade over the std worn seats also hold you in a bit better after quick sale
price:$100 firm
s13/180sx manual cluster 59796kms good condition
price: $40
s13/180sx 3 inch catback pipe to axle back stainless steel no mufflers or resonators flanged
price:$30
set of pedders lowered springs and shocks for s13/180sx sat just right on the tyre rear fr just off springs been chopped 1 coil all round nsf strut missing 1 stud
price:$100 firm
autometer phantom 52mm boost gauge 30 psi with hose no cup
price:$50
located: sydney west
pm me

32 OD cooler pipe help

Thu, 09 Sep 2010 12:16:42 +0000

hey guys. Im looking for a place in Adelaide or internet site that i can buy a 32OD silicon pipe from.

its the pipe that you block on most good intercoolers to get mad flutters on the plenum side

any help would be great.

CHANGES TO PRIVATE SALES RULES

Thu, 09 Sep 2010 12:03:03 +0000

Fellow Hardtuned Members　

As a result of a large number of active members on the site, the Hardtuned.net team agree and have decided, that members are allowed to have only one for sale post per fourteen days (1 per 14).

We consider it unfair for everyone, if perceived spamming within the for sale section occurs.

Please note that a failure to abide by these rules will result in offending members being initially warned and repeat offenders will be banned from using the site.

Thankyou for your co-operation in making the site more enjoyable.

Cheap Closed door respray

Thu, 09 Sep 2010 11:56:21 +0000

hey guys im looking for someone to do a cheap closed door respray on my rx7 for me, i have all the paint just need someone to do it for me.

let me know if you can do it or know of anyone

Thanks

skyline nats whos attending?

Thu, 09 Sep 2010 11:34:26 +0000

anyone going out for a look this weekend at skyline nats?

sr20 damper, hid's ,short shifter, s13 bar, ca wing, shift light

Thu, 09 Sep 2010 11:33:19 +0000

Xeon Xellence 6000k Hid's h4 globe type ,few months old still like new, comes with everything in box $80

Drift shift light few months old works perfectly easy to adjust, shift light lights up well, paid over 120 for it selling for $80 ono

s13 front bar, with slats + foam reo support, good cond, currently in n/a green no cracks ect. $50

Midnightmods sr20 short shifter works perfect , tight changes good upgrade for your n/a or turbo g.box $50 + your old shifter

Ca spoiler minus break light, all filled and painted $30

sr20 engine damper perfect condition $50

pics upon request

Greensborough
0402578945

Dan's not another! 180sx build Thread

Thu, 09 Sep 2010 11:23:24 +0000

1992 Nissan 180X RPS13
Odometer: Chassis=135,000km's

Engine
SR20DET - 10,000km's
233rwkw @ 6021rpm On 21PSI
428Nm @ 4507rpm
Garret t2871r w HKS adjustable actuator
CP Forged Pistons 10:1 ratio
Brian Crower Billet Con Rods
ARP Head Stud Kit
Cometic Metal Headgasket
Brian Crower 264 degree 12mm Lift Cams
Brian Crower Valve Springs
New Nissan oil pump
New Nissan Water Pump
New Nissan Gasket Kit
King Pro Series Bearings
Precision Lifter Kit
S15 Chain Tensioner
New Nissan Timing Chain
Greddy Sump Pan
RAS KIT
SplitFire DI system with Splitfire Bridging system
Earls Braided Turbo Oil & Water Lines
KoyoRad 53mm Alloy Radiator S14
Z32 Air Flow Meter
Tomei 740cc injectors
Bosch 040 Fuel Pump
Gizzmo EBC
PowerFC with hand controller
Blitz CS Front Mount Intercooler
Mild Steel 3" Straight through Catback
Stainless Steel 3" Dump & Front Pipe

Drivetrain
Nismo Super CopperMix Single Plate Clutch Kit 420ps
Original Standard 5 speed manual
Nismo GT PRO 2way diff (4.1 ratio)
5 bolt half shafts

Suspension/Handling/Steering
Cusco Zero 2RS Coilovers with Cusco Camber Tops
Whiteline 27mm Adjustable Front Swaybar, Whiteline 22mm Adjustable Rear Swaybar
Powered By Max Camber, Toe, Traction, Castor, Alloy cradle spacers
Tein Extra Lock Spacers
Nolathane bushes throughout rear subframe

Brakes
Standard S13 (looking at a Powered by max rotor set matched with Z32 Calipers all round)
QFM A1RM brake pads

Wheels/Tyre
Front Work XD9 18x9+20 with 225/40/18 stretched
Rear Work XD9 18x10+18 with 235/40/18 stretched

Interior
OMP deep Dish on HKB Boss kit
Bride Brix 1.5 on Bride Super Low rail
GORPO Camera mount
Apexi PowerFC Hand Controller
Apexi Mechanical Boost Gauge
Autowatch Alarm/Immobiliser/Central Locking
Rockford Fosgate Sounds

Chassis/Body
Full Type X Kit getting fitted Right now.....well when i have time
Paint is in average condition
Rolled and Pumped rear guards
Fair few dents/bumps/scratches
Slight damage to rails or undercarriage

Thanks too
Donny From SR NRG, best bloke ever been mates since this was stock . Built and sourced near every part i own.
Trent from Status tuning AKA Chequered Tuning, Awesome guy that always goes that extra mile to help me out. 2am nights etc
Jesse Streeter, Parts from japan asap with best price and communication!
Andrew from St Marys Crash, hooked me up with paint for my type x kit.

Some Images of bits and pieces on the way!

SR20DE Apexi Extractors

Thu, 09 Sep 2010 11:16:36 +0000

hey guys popped my sr20de gone turbo so i wont be needing these anymore
they are apexi extractors chasing $300 ono
located northern suburbs
0432010693

Quick Power FC Question

Thu, 09 Sep 2010 11:11:31 +0000

What is involved in getting a S14a Power FC to work in a S14..???

Is it even possible...?? has anyone done it...

help appreciated.

Cheers

s13 boot plastics

Thu, 09 Sep 2010 10:57:41 +0000

After the s13 silvia passenger side and rear boot plastic.

Pref located in SE Surburbs Vic

Thanks

NSW Sydney -17 Drifteks

Thu, 09 Sep 2010 10:51:51 +0000

hey all looking to probably change my wheels soon so maybe looking to move these drifteks.

17x9 + 35 (+ 15 with spacers) on front but currently have a 20mm spacer which can come with the wheels.
17x9.5 +15

has 95% tread kuhmo ecsta on front
has some kingforests china's with 80% on the rear.

wheels are in good condition no rash at all..

$1400 firm with spacers.

Rotty pups

Thu, 09 Sep 2010 10:50:01 +0000

i have 2 pups left for sale! 1 male 1 female. asking $600 of the male and $700 for the female!

contact me on 0413595838

URGENT SALE R31 SKYLINE MANUAL $1500

Thu, 09 Sep 2010 10:49:55 +0000

12/1988 R31 Skyline
RB30
Manual
Extractors
Clean interior
Body Paint mild fading
Motor very clean, well looked after by previous owner.

I have owned this car for about 4 weeks and driven it for 2 due to loss of licence.
Very good as daily or good base for decent street/track car.

!!!!!!URGENT MUST SELL BY SATURDAY!!!!!!!

!!!!!!$1500!!!!!!

Can't get much better than that!

Contact by Phone ONLY!!
0402227749

Cheers,
Martin

s15 air con vent $10

Thu, 09 Sep 2010 10:29:54 +0000

selling 1 s15 air con vent cause it is missing the piece of plastic that holds the 3 vent find together so they all move at the same time. im in townsville $10 bux

++ KAAZ 1.5way LSD ++

Thu, 09 Sep 2010 10:28:16 +0000

Alright, i have a 4.11 ratio KAAZ 1.5way mechanical diff out of my car. it's a great diff, i wouldnt be selling it if i didnt need the $$. i drove around with it as a daily up at a ski resort where there was ice, snow and wet everywhere and didnt have any issues with it slipping or skipping around tight corners or anything, barely anything with 3 point turns either. but on the track it was beautiful, no signs of any open wheeling, extremely predictable, with great turn in.

this comes with an R32 housing, and half shafts, so ready to bolt straight in, dont have to take the centres out. however i have an R33 housing(with ABS) sitting here as well, so if any R33 buyers are interested, i can swap it into that housing instead and it will go into ur R33.

Specs:
Kaaz
1.5 way mechanical
4.11 ratio
R32 and R33 Housing/half shafts

$880

Located near Mitcham in SA, can send anywhere in Aus at buyers expense.

here's some pics of the actual diff:

1995 180SX DRIFT PIG

Thu, 09 Sep 2010 10:23:55 +0000

Up for sale is my 180sx track car...

1995 180sx (SR20DET) 5 speed manual. (116500kms)

Has only seen 1 track day as used to be my old daily until i brought the xr6 around 6 months ago..
Had planned on keeping her a little while longer yet, but i have just come home from overseas and need the money..

yeh, shes a pig and nothing to really look at, but it has everything you need to link the corners and nothing else really needs to be done.
so anyone who is looking for a good platform to start drifting, this would be a very good start.
it is simply amazing to slide with! it handles soo well!.

However a little bit of time and TLC could change things though if you wanted to do some work cosmetically.

Always serviced every 5000kms using motul oil

- T28 GTIR TURBO - ( Biggest of the t28's from factory with a .86 rear housing for more top end power)

- NISTUNE ECU

- 550cc NISMO INJECTORS

- BLITZ EBC

- Z32 AFM

- HKS FRONT MOUNT INTERCOOLER

- 3" TURBO BACK EXHAUST

- BOSCH 040 FUEL PUMP

- K&N POD FILTER

- GREDDY OIL CATCH CAN

- AIR INDUCTION KIT

- HSD COILOVER SUSPENSION (Height, damper and camber adjustable)

- KAAZ 2 WAY LSD DIFF

- kAZAMA ADJUSTABLE CASTOR ARMS

- 6 PUK CERAMETALLIC CLUTCH

- CUSCO FRONT STRUT BRACE

- CUSCO REAR STRUT BRACE

- SAFETY 21 6 POINT ROLLCAGE

- BRIDE BUCKET SEAT

- NARDI WHEEL

- DRIFT BUTTON

- 17" BBS STYLE MESHIES WITH A BIT OF DISH

The car is current tuned for 4 boost settings

stage 1 (168rwkw)
stage 2 (180rwkw)
stage 3 (200rwkw)
stage 4 (221rwkw)

Its been gutted in the back and a full rollcage slapped in.
I do still have all the plastics and seats that you can take also..

There are a couple of minor points to point out,

Unfortunatly i was in the middle of changing guards and prepping her for paint.
so it currently has new 25mm wider front guards on the front unpainted and no front bar - I do have a typeX front bar you can take.
Also the gearbox may need looking at as it for some reason wont go into reverse..

Apart from that the car drives amazing and has been alot of fun while it lasted.

looking for $7000,

have spare sets of wheels ill chuck in also

PM or call if interested on 0401 224 719

cheers.

How long can an sr20 sit around and still be ok ?

Thu, 09 Sep 2010 09:54:02 +0000

I have a spare sr20 that been sitting without being turned over for a couple of years, will there be any issues ?
Any problems with the rings ?
All orifices have been stuffed with rags.
It's a JDM import with about 60'000 k's on it, was originally an auto.

Thanks Jeff

R32 GTS-T manual tailshaft

Thu, 09 Sep 2010 09:47:05 +0000

Hi guys

Ive got a manual tailshaft off my 32 that I no longer need.

$120

Located in Glenelg

Pm if interested

P platers are going to be banned from driving 6cyl

Thu, 09 Sep 2010 09:33:35 +0000

(move if in wrong section)
So i was with a group of mates and talking about P plates. They all told me that the vic roads is introducing new rules sometime soon, dont know when, its for the Learners who are going to become P platers.
They already put a ban on high powered vehicles, (8+, turbo,supercharge) and apparently the new law will class 6cyl as a high powered vehicle. I know that some 6s are pretty quick, take the sv6, xr6, r33, etc.
They will exclude some 4 bangers as well, the vtir prelude/integra?
So basically they will be limited to 4cyl only (red ps, green you can drive the 6) It wont apply to current P plates.

Has anyone else heard this? or have i heard a bunch of smelly shit?

na and turbo boxs

Thu, 09 Sep 2010 09:05:11 +0000

ok so i new here and u use will prob tell me im in wrong section or so on but can someone please help

i have an sr20de in my car but gearbox is dead and want to put a turbo box in is there anything i will have to change to fit it up

thank you

my 200 sx s14

Thu, 09 Sep 2010 08:49:15 +0000

hay guys this is my s14 she got front cover 3 years ago iv had 4 about a year now onley lasted 3 weeks and i ended up blowing the moter how i found 30 pound boost and she gave way so at the moment she at the work shop geting a full engine build ill be geting it back next week will have over 300+kw cant wait im geting it done by micks motersports

FS: Subaru WRX - Low KM - 5sp

Thu, 09 Sep 2010 08:47:11 +0000

PRICE
$12,000 o.n.o -consider trades but there are few cars that I am keen on, namely: Accord Euro, Lexus IS200, BA Falcon Ute.

DESCRIPTION
Selling my 1995 WRX Impreza wagon/hatch (rego to March 2011)
Very low km for it age of 145,000kms.

5 Speed Manual
Aftermarket exhaust with twin tip muffler
16" Alloys with great tyres
Factory Tow bar
Sti front seats (still have original seats)
GPS/DVD/TV/SD/USB double din sized head unit (still have original)
Has had in recent months: Timing Belt, Cam Seals, Crank Seal, LH Side Rocker Cover Gasket, Spark Plugs, Diff/Gear Oils Replaced, Engine Oil + Filter Replaced, Air Filter, Steering Boot. Very thoroughly kept mechanically, it does not miss a beat, drives really smooth, no funny noises etc.

Will deduct $250 if you want the original seats instead of the STI seats.
Will deduct $250 if you want the original head units instead of the aftermarket one.

LOCATION
Wynyard, NW TAS

CONTACT
VIA PM!

RB 20 Garrett 2860 turbo

Thu, 09 Sep 2010 08:42:04 +0000

Hi all selling my garrett 2860 off my RB20 to fund an engine swap

No shaft play or end float

Turbo is mint, done under 5000kms, feels really good on car and was making 215 kw for the short time it been on the car without injectors, afm or tune

Can supply oil drain pipe and feed hose, just needs water line which are easy as

Still on car now and can be heard running, Turbo will be coming off sunday if sold

Asking $1200 with lines

0410 467 787 sms or call after 5pm

RSS - Complete Site

Amish Sex

[SYD] arc airbox / ganador mirrors / whiteline arms / s13 cats

Power Differences Between Shootout Modes

FS: 2001 Yamaha R1

Part Shop Max Arms

Defi style gauges from only $80 each!?!?

ISC 52mm alloy aftermarket radiators

ISC N1 coilovers "SUPER SALE" $1199 per set! Limited time only (normally $1499)

Steering Wheel

Steering Wheel

problem viewing classifieds

CA18DET PARTOUT

180SX TYPE X SPOILER!1

Meister 17x9 +14 4H MEGA RARE- Heaps of 17-18" Work Volk , Nismo, SSR wheels +S13 S14 S15 180sx OEM and aftermarket parts- ALL JAP BRANDS no cheapy :)

> Complete Suspension Packages At Discounted Prices!

dc snowboard boots size 10

s13 door, rear bar

ROLL CAGE for 180 SX

My Number 2

Where to buy drifteks

Hey All

rb30 pacemaker extractors

Cordless Phone

Work Equips 18x9 18x10 EXCELLENT CONDITION

pod filter on turbo diesel ?

RPS13

180SX Headlight shroud, Sunroof latch

Wanted Power FC Hand Controller

Rear brake caliper

sr20det

180SX front bar

s13 bonnet

old school rally impreza

WTB - - 180sx or s13 full lock set

[WTB] Canon 450D / 500D / 550D

Making s13.5 guards

GZ20 Soarer

s14a seats s13/180sx cluste

32 OD cooler pipe help

CHANGES TO PRIVATE SALES RULES

Cheap Closed door respray

skyline nats whos attending?

sr20 damper, hid's ,short shifter, s13 bar, ca wing, shift light

Dan's not another! 180sx build Thread

SR20DE Apexi Extractors

Quick Power FC Question

s13 boot plastics

NSW Sydney -17 Drifteks

Rotty pups

****URGENT SALE R31 SKYLINE MANUAL $1500****

s15 air con vent $10

++ KAAZ 1.5way LSD ++

1995 180SX DRIFT PIG

How long can an sr20 sit around and still be ok ?

R32 GTS-T manual tailshaft

P platers are going to be banned from driving 6cyl

na and turbo boxs

my 200 sx s14

FS: Subaru WRX - Low KM - 5sp

RB 20 Garrett 2860 turbo

URGENT SALE R31 SKYLINE MANUAL $1500